| |

UC FORUM

 Forgot password?
 register
View: 29703|Reply: 14

[Tutorial] How To Flash Dead Phones Using JAF Service Suite

 Close [Copy link]
Post time: 2-10-12 23:30:45
| Show all posts |Read mode
Edited by ashok.12345 at 2-10-2012 22:00

How To Flash Dead Phones Using JAF Service Suite

hello friends here r different methods of flashing dead phone........


USE THIS MOD AT YOUR OWN RISK.

TRY THIS ONLY IF U ARE NOT ABLE TO FLASH WITH PHOENIX

some people having dead phone for using PHOENIX And that happens because the ADL server checks the CRC after the firmware upgrade, which won't match because you cooked your firmware files and will cause the boot-loader not to change back to normal operating mode. So DO NOT USE PHOENIX when upgrading CORE, ROFS2, ROFS3 cooked files, use JAF only...

INSTALLING AND SETTING UP JAF

1. Download this file
     A. JAFSetup_1.98.62.rar
     B. OGM_JAF_PKEY_Emulator_v5.rar

2. UNRAR the bothe file to your desktop
3. open the folder
4. install JAFSetup_1.98.62.exe
5. install JAF to the default location
6. Copy & Paste OGM_JAF_PKEY_Emulator to MYCOMPUTER>LOCAL DISK (C>ROGRAM FILE>ODEON>JAF>

Note on you only have to do "this" if you are using Vista, Windows 2003/2008 server. or Windows 7





as j.a.f and navifirm direct links are given at the bottom
Post time: 2-10-12 23:43:37
| Show all posts
Stage 2 starting................PUBKEYS already sent...
PUBKEYS already sent...
PUBKEYS already sent...
PUBKEYS already sent...
..........Phone prepared OK!
Waiting for the phone to boot...
Searching for phone...
Status byte: 8000
Selecting CMT flash...
Result: 0000
Phone is in flash mode...
CMT blocks: 586, APE blocks: 0
Erasing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_prd.core.C00...
Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000
Erasing cmt zone 00083400 - 003FFFFF ... Erase result: 0000
Erasing cmt zone 00800000 - 00D5FFFF ... Erase result: 0000
Erasing cmt zone 00D60000 - 0B71FFFF ... Erase result: 0000
Partition result: 0014
Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_prd.rofs2.V19...
Erasing cmt zone 07920000 - 0A2FFFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_C03_prd.rofs3.fpsx...
Erasing cmt zone 0A300000 - 0B71FFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_001_000_U001.uda.fpsx...
Erasing cmt zone 0B720000 - 1EF7FFFF ... Erase result: 0000
Send CMT CFG...

Writing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_prd.core.C00...
Sending CMT HASH for ADA
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for RAP3NAND
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
cmt->PAPUB keys already sent...
Sending CMT HASH for SOS*UPDAPP
Sending CMT HASH for SOS*DSP0
Sending CMT HASH for SOS*ISASW
Sending CMT HASH for SOS+CORE
Sending CMT HASH for SOS+ROFS1
Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_prd.rofs2.V19...
Sending CMT HASH for SOS+ROFS2
Write result 27: 1701
Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_C03_prd.rofs3.fpsx...
Sending CMT HASH for SOS+ROFS3
Write result 27: 1701
Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_001_000_U001.uda.fpsx...
Rebooting...
Finishing CMT session...
Restarting CMT...
Pooling phone...
MCUSW: V ICPR72_10w04.5
22-03-10
RM-559
(c) Nokia
APESW: V 20.0.005
VariantSW: V 20.0.005
Prodcode: 0589421
Done!
Post time: 2-10-12 23:34:18
| Show all posts
Edited by ashok.12345 at 2-10-2012 21:07

GETTING YOUR FIRMWARE DOWNLOAD AND READY FOR FLASHING


1. go to "C:\Program Files\Nokia".
2. create a folder called "Phoenix" > C:\Program Files\Nokia\Phoenix
3. open C:\Program Files\Nokia\Phoenix
4. create a folder called "Products" > C:\Program Files\Nokia\Phoenix\Products
5. open C:\Program Files\Nokia\Phoenix\Products
6. create a folder with phones ROM VERSION > RM-={BANNED}, C:\Program Files\Nokia\Phoenix\Products\RM-={BANNED}
7. open C:\Program Files\Nokia\Phoenix\Products\RM-={BANNED}, leave it open. ={BANNED} - your Rm version
8. go here http://www.symbiantalk.net/showthrea...uct-codes-more
10 download your firmware using "navifirm.exe"

DOWNLOAD NAVIFIRM below:






11. save your firmware to > C:\Program Files\Nokia\Phoenix\Products\RM-={BANNED}

Note...

RM-={BANNED} will be different depending on your country or region (IE, RM-505, RM-555, etc...)

NaviFirmPlus_1.3.zip

424.47 KB, Downloads: 537

Post time: 2-10-12 23:37:55
| Show all posts
Edited by ashok.12345 at 2-10-2012 21:09

USING JAF TO INSTALL COOKED ROMS

12)Install Nokia pc suite if you dont have it installed already (Cable Drivers Are installed with them and needed)

1. from main "jaf" folder.
3.click on "OGM_JAF_PKEY_Emulator_v 5.exe" then Click Go






4. JAF gets loaded
6. in JAF left click the BB5 tab
7. under "Flash Settings"...

A. uncheck "CRT 308"
B. check "Manual Flash" "Dead USB"
C. check "Normal Mode"
D. check "Use INI"

Post time: 2-10-12 23:40:21
| Show all posts
Edited by ashok.12345 at 2-10-2012 21:11

8. Wait for INI popup window to open.
[Then a list will appear containing all phone models like the picture below]


9. scroll down to your USB FIRMWARE CABLE TYPE
10. Select firmware type (RM-???)

If JAF doesn't find the RM-={BANNED}, just add the following two lines to the end of the file jaf_nok4models.ini (normally found in C:\Program Files\ODEON\JAF\):




Note RM-??? will be your country or region type

11. left click "OK"
12. your FIRMWARE FILES ARE SETUP AND LOADED READY FOR FLASHING BY JAF
13. Turn Off Your Phone connect it to your pc.
14. in the "Operations Box", left click on "FLASH"
[Then Click YES when a dialog appears like on the picture below]



15. then Jaf will ask for turn on your phone click turn on [Now Just press the Power Button on your phone a little (just for about 1 second)]
15. Wait for JAF to start flashing
16. after flash complete your phone will auto start

It's that simple, you won't ever brick your phone if you do this way.
Post time: 2-10-12 23:42:09
| Show all posts
Edited by ashok.12345 at 2-10-2012 21:13

Status LOG of Dead USB Flashing :

JAF version 1.98.62
Detected PKEY: 90009699
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.29.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-559\

Searching for default location of ini...
Checking path: \Products\RM-559\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-559\
Scanning ini files...
Searching for default location of ini...
Checking path: \Products\RM-559\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-559\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_prd.core.C00
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_prd.rofs2.V19
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_C03_prd.rofs3.fpsx
APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_001_000_U001.uda.fpsx
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW! Searching for phone...Found
Error reading phone init data...
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW! {if you are using dead phone usb mod}
Searching for phone...Found
Sending RAW loader...
Using 009.012.005
Elf2flash 09.11.000
CMT RAW loader...
Patching RAW boot step1...
Patching RAW boot step2...
Patching RAW boot step3...
Sending RAW Loader...
....................Loader Sent!
Post time: 3-10-12 00:06:18
| Show all posts
Edited by ashok.12345 at 2-10-2012 21:40

some extra help n screenshoots......THINGS REQUIRED::
a dead BB5 phone
JAF cr@cked/patched
NAVIFIRM tool
a USB data cable



NOTE: all old BB5 (uni-core processor) phones can be flashed in Dead USB mode, but only those new BB5 (multi-core processor) phones can be flashed in Dead USB mode which have their boot loader intact.
in many cases of new BB5 dead phones, the boot loader also gets corrupted.

Supported Nokia phones until now:
:merci2: thanks to all the testers
6270 tested by JAF team
7370 tested by JAF team
3250 tested by JAF team
6085 tested by milly2
6125 tested by vmin81
6131 tested by EAET CLINIC
6233 tested by JAF team
6300 tested by JAF team
6280 tested by JAF team
5200 tested by JAF team
5300 tested by JAF team
5310 tested by vmin81
5610 tested by vmin81
6290 tested by JAF team
5700 tested by JAF team
8600 tested by JAF team
3110 classic tested by JAF team
6555 tested by vmin81
6120classic tested by The SAINT®
6110navigator tested by vmin81
6500classic tested by JAF team
6500slide tested by JAF team
5500 tested by Serlucifer
7390 tested by vmin81
7373 tested by vmin81
7900 tested by vmin81
E50 tested by vmin81
E51 tested by vmin81
7500 tested by ValisiuS
N76 tested by vmin81
N81 8gb tested by vmin81
3120c tested by vmin81
3600s tested by The SAINT®
6600 fold tested by The SAINT®
6124 classic tested by The SAINT®
6210 Navigator classic tested by The SAINT®
6600 slide tested by vmin81
7610 supernova tested by vmin81
E71 tested by The SAINT®
7210 supernova tested by The SAINT®
N96 tested by The SAINT®
N85 tested by The SAINT®
N79 tested by The SAINT®
3610 Fold tested by The SAINT®
5800 XpressMusic tested by The SAINT®
E66 tested by The SAINT®
6303 tested by The SAINT®
N86 tested by The SAINT®
N97 tested by The SAINT®
5730 SuperNova tested by The SAINT®
5530 XpressMusic tested by The SAINT®






it is recommended to download your required firmware by NAVIFIRM tool, it downloads from directly NOKIA servers, so you get a guaranteed good firmware


NOTE:: the firmware downloaded with above tool will be in the form of a folder with few files in it, put that folder at C:\Program Files\Nokia\Phoenix\Products\ if any of these folders do not exist, make them.

just run the JAF through the PKEY emulator



NOTE:: it is recommended that the phone be in normal mode (with SIM inserted)





Post time: 3-10-12 00:11:08
| Show all posts
Edited by ashok.12345 at 2-10-2012 21:45

one more method



Notes
This method will erase user data
Check if battery is charged
You must flash the same version or newer version software on phone. If You don't know which software version does the mobile phone has, flash the newest available software on phone.



What You need?
JAF interface
PKey dongle
Installed JAF & Pkey drivers and software
Installed "Nokia Connectivity Cable Driver"
USB cable: It depends on mobile phone connector: miniUSB, microUSB, POPport USB cable



Flashing procedure

1. Connect Pkey dongle, JAF interface and USB cable on computer.

2. Start JAF software.

First: select "USB" as "Communication mode"
Then: select "Factory set", "Normal mode", "Dead USB", "Manual flash", untick "CRT 308".
After that select "Use INI".




3. After "Use INI" selected, a window will appear where You have to select the mobile phone type.


4. Now select language package (product code, brand).



5. Press "Flash" button. After that, a warning message will appear. Press "Yes" button.


6. JAF software will search for phone. Connect turned off phone on USB cable, then press "On" button on phone until "Phone detected" message appear.



7. Wait till JAF flash the phone. When finished, "Done" message will appear.

Post time: 3-10-12 00:18:56
| Show all posts
Edited by ashok.12345 at 2-10-2012 22:06

Flashing with J.A.F by arjunkar....as one more method

REQUIREMENTS:


1]J.A.F Software pkey emulator.
2]USB data cable.
3]NAVIFIRM
4]Nokia phone.

WHAT IS THE NEED OF FLASHING?

There are many uses you can keep updated with latest features and you can modify your phone according to your wish.

TYPES OF FLASHING:

There are several types.
1]using J.A.F box and Fbus cables .
2]Nokia software updater(NSU) .
3]phoenix .
4]J.A.F Software with Pkey .

Installation:

download J.A.f from here

get navifirm from here


extract that zip archive from above file,you will get J.a.f setup file and a virtual pkey.
install j.a.f




warning: many antivirus softwares will show some j.a.f components as virus But just ignore it.

note: windows 7 and vista users must run pkey as administrator and set compatibility as windows xp


Obtaining Firmware(software):


open navifirm and select target as ‘product external’.
it will display the list of Nokia handsets and their RM version.
click on your handset name with correct Rm version.


note: you can check rm version by dialling *#0000#

next another list will display in release column, select your firmware version.

CAUTION!: download correct firmware version, or even higher version but not lower versions, because by downgrading or flashing with lower versions may cause you phone to dead, but you can revive dead phone too via jaf
next comes variant, you can download and flash with any variants of software that doesn’t matter, but if you want exact variant, than open your phone’s back cover, remove battery under that you will find code like this 0559107(phone specific).
next firmware contents will be displayed download only these files.
.mcu
.cnt or .image
.ppm
Post time: 3-10-12 00:24:27
| Show all posts
Edited by ashok.12345 at 2-10-2012 21:55

About firmware components:

.mcu this is the largest one among firmware files,it contains all program data of firmware,some versions of j.a.f wont detect .mcu then just rename it to .c0r (c zero r).
.image all gallery elements such as tones,wallpapers,default games,apps are included in this file.
.ppm this is the most important one,it contains all tones such as keypad tone,recording beep,menu icons etc.we can change every element of this file,firmware modification is possible.

Preparation:


“flashing is the process of upgrading, downgrading* and reinstalling phones firmware or software”

open pkey, then run J.a.f, keep pkey opened don’t close it just minimize it.
go to bb5 column.
check the following there.
a)manual flash
b)Factory set
c)normal mode
4)then click on mcu,browse to folder where you downloaded mcu and select it (if jaf wont detects mcu file then rename it to .c0r then re try).
5)like that select ppm ant .cnt or .image files.
6)connect your phone with the help of usb data cable,in PC suite mode.
7)before flashing make sure your phone battery has enough charge,i recommend connecting to charger while flashing.


note: make sure you have closed all softwares related to Nokia like PC suite,phoenix etc exit PC suite from system tray also.
Post time: 3-10-12 00:26:01
| Show all posts
Edited by ashok.12345 at 2-10-2012 22:04

*Downgrading is not possible on all phones, it depends on firmware, it’s not recommended.

Flashing:


after doing these steps,then click on flash button,you will get two warnings,just ignore them,don’t touch your phone till j.a.f says “done!”.

thats it you have flashed your phone .


Dead flashing:

1]same as flashing,just tick ,dead flash at bb5 coloumn in jaf
2]it is necessary to connect charger now,click on flash
3]press power button when prompted by jaf

note: sim card must be inserted while flashing.
Post time: 3-10-12 13:09:51
| Show all posts
bro....thnx for ur nice work...I've created pdf file for this whole tutorial..
JAF Complete Tutorial.pdf (1.97 MB, Downloads: 1119)
Post time: 3-10-12 14:17:45
| Show all posts

RE: How To Flash Dead Phones Using JAF Service Suite

Edited by Infodsagar at 3-10-2012 18:03

I want to add orange homescreen so I download edited firmware. When i click on useini in jaf. I cant found my phone or rm-561. Tell me how to update list
Post time: 28-10-12 23:20:34
| Show all posts
Note: The author has been banned or deleted.
Post time: 29-10-12 03:17:46
| Show all posts

RE: How To Flash Dead Phones Using JAF Service Suite

gtasince94 replied at 28-10-12 20:50
1. Bro, what is dead and live phones? plz define them...   
2. What are the changes will made if ...

1)Hello dear tnks 4 creating pdf file 4 this tutorial
2)and dead phone is one which stop responde 2 work by falling and usage..so it can be reused by flashing it..4 any doubt plz pm me...
You have to log in before you can reply Login | register

Points Rules

Dark room|Mobile|UCWeb Inc.   

24-10-14 19:11 GMT+8

Powered by Discuz! X3

Release 20130801, © 2001-2014 Comsenz Inc.

MultiLingual version, Rev. 215, © 2009-2014 codersclub.org

Quick Reply To Top Return to the list